| Power Sit up: |
0° to 75° |
| Width: |
30” or 32” |
| Length: |
66” thru 72” (without headrest) |
| Headrest Length: |
12” from edge of table, depending on type
of headrest |
| Controls: |
Dual tethered pneumatic (AIR) controlled switches |
| Frame: |
All steel constructed |
| Frame Colors: |
White |
| Coating: |
Powder coat paint |
| Power: |
115 volts, 4 amps, and standard wall outlet |
| Motor: |
Electric Linear Shaft (Non-Hydraulic) 115 volts,
1.6 amps, AC 1 phase, 1/10 hp, 60 hz, Thermally Protected, (UL#E32557,
CSA#LR42492) Made in the USA |
| Bearings: |
All pivoting surfaces have self-lubricating bearings |
| Weight: |
Average 150 pounds |
| Max Lifting: |
600 pounds from lowest position |
| Travel Speed: |
From top to bottom in 50 seconds |
| Travel Distance: |
From top to bottom, 12”(+/-1”) of
travel |
| Fabric: |
Levanté Boltaflex ® with
PreFixx ® ColorGuard |
| Components: |
All UL and CSA approved components |
| Warranty: |
5-year limited warranty |
| Height Adjustment: |
Lowest point, to top of wood: 17”
Highest point, to top of wood: 29” |
|
Comfort Craft, Inc. certifies that the following list contains all the electrical components for all Comfort Craft tables. Further, that all parts are UL and CSA approved parts.
|
| Parts: |
4A-250V AGC Fast Blow Fuse |
| |
30A-120V Fuse Holder |
| |
22A-125V On/Off Illuminated Switch |
| |
21A-125V Momentary On/Off Air Switch |
| |
20A-600V #6 Ring Terminal |
| |
20A-600V Fully Insulated Nylon Female Disconnect |
| |
1.6A-115V Linear Actuators |
| |
26A-380V 22-14 AWG 6 Pole Terminal Block10A-120V |
| |
18 AWG Multi-color Wire |
| |
3 Conductor 18 AWG SVT Power Cord |
